| PDF资料下载 |
暂无数据
|
|---|
参数有误？
| 参数 | 参数值 | 操作 |
|---|---|---|
| 商品目录 | 蜂窝模块 | |
| 主芯片编码 | ESP32 |
Imagine 5 networks in one perfectly-formed, same-small-foot-print-as WiPy and LoPy, IoT development board. MicroPython enabled. FiPy includes WiFi, Bluetooth, LoRa, Sigfox and dual LTE-M (CAT M1 and NBIoT) the FiPy gives access to all the world’s LPWAN networks on one tiny board.
Note: The Fipy works for all CatM1 and NB-IoT bands worldwide. We strongly recommend ordering an LTE-M Antenna for best performance.
Get on with a board that gives you full flexibility during testing, install, deployment and even later when you want to switch real-time your airtime network provider. You can switch when the time is right for you or set some parameters that will do so automatically.
FiPy Features
Powerful CPu
Five networks: WiFi, BLE, cellular LTE-CAT M1/NB1, LoRa and Sigfox
1KM WiFi range
MicroPython enabled
Fits in a standard breadboard (with headers)
Ultra-low power usage: a fraction compared to other connected microcontrollers
Technical details
| Dimensions | 0mm x0mm x0mm |
| Weight | G.W 31g |
| Battery | Exclude |
| Espressif ESP32 SoC | |
| Dual processor and WiFi radio system on chip | |
| Networking processor handles the WiFi connectivity and the IPv6 stack | |
| Main processor is entirely free to run the user application | |
| An extra ULP-coprocessor that can monitor GPIOs, the ADC channels and control most of the internal peripherals during deep-sleep mode while only consuming 25uA | |
| 2 x UART, 2 x SPI, I2C, micro SD card | |
| ANalog channels: 8×12 bit ADCs, 2×8 bit DAC | |
| Timers: 2×64 bit with PWM with up to 16 channels | |
| DMA on all peripherals | |
| GPIO: Up to 22 | |
| SHA, MD5, DES, AES | |
| 802.11b/b/n 16mbps | |
| Low energy and classic RTC | |
| Running at 32KHz | |
| Node range: Up to 50km | |
| SSL/TLS support up to 1.2 | |
| WPA Enterprise security | |
| AES encryption engine | |
| RAM: 4MB | |
| Flash Memory: 8MB | |
| GPIO: Up to 22 | |
| Hardware floating point acceleration | |
| Python multi-threading | |
| Voltage Input: 3.3V – 5.5V | |
| 3v3 output capable of sourcing up to 400mA |
Part List
| FiPy | 1 |
| ECCN | 5A991.b |
| HSCODE | 8517709000 |
| USHSCODE | 8517700000 |
Imagine 5 networks in one perfectly-formed, same-small-foot-print-as WiPy and LoPy, IoT development board. MicroPython enabled. FiPy includes WiFi, Bluetooth, LoRa, Sigfox and dual LTE-M (CAT M1 and NBIoT) the FiPy gives access to all the world’s LPWAN networks on one tiny board.
Note: The Fipy works for all CatM1 and NB-IoT bands worldwide. We strongly recommend ordering an LTE-M Antenna for best performance.
Get on with a board that gives you full flexibility during testing, install, deployment and even later when you want to switch real-time your airtime network provider. You can switch when the time is right for you or set some parameters that will do so automatically.
FiPy Features
Powerful CPu
Five networks: WiFi, BLE, cellular LTE-CAT M1/NB1, LoRa and Sigfox
1KM WiFi range
MicroPython enabled
Fits in a standard breadboard (with headers)
Ultra-low power usage: a fraction compared to other connected microcontrollers
Technical details
| Dimensions | 0mm x0mm x0mm |
| Weight | G.W 31g |
| Battery | Exclude |
| Espressif ESP32 SoC | |
| Dual processor and WiFi radio system on chip | |
| Networking processor handles the WiFi connectivity and the IPv6 stack | |
| Main processor is entirely free to run the user application | |
| An extra ULP-coprocessor that can monitor GPIOs, the ADC channels and control most of the internal peripherals during deep-sleep mode while only consuming 25uA | |
| 2 x UART, 2 x SPI, I2C, micro SD card | |
| ANalog channels: 8×12 bit ADCs, 2×8 bit DAC | |
| Timers: 2×64 bit with PWM with up to 16 channels | |
| DMA on all peripherals | |
| GPIO: Up to 22 | |
| SHA, MD5, DES, AES | |
| 802.11b/b/n 16mbps | |
| Low energy and classic RTC | |
| Running at 32KHz | |
| Node range: Up to 50km | |
| SSL/TLS support up to 1.2 | |
| WPA Enterprise security | |
| AES encryption engine | |
| RAM: 4MB | |
| Flash Memory: 8MB | |
| GPIO: Up to 22 | |
| Hardware floating point acceleration | |
| Python multi-threading | |
| Voltage Input: 3.3V – 5.5V | |
| 3v3 output capable of sourcing up to 400mA |
Part List
| FiPy | 1 |
| ECCN | 5A991.b |
| HSCODE | 8517709000 |
| USHSCODE | 8517700000 |
A : 请您放心,唯样商城所售卖的商品均为原装正品，我们是国内外知名品牌厂商的电子元件授权经销商，从源头保证品质。
A : 唯样自营精选品牌获得原厂授权代理资质，可以提供代理证书。部分商品数据来源于合作伙伴（如信和达、富昌电子、RS电子），我们对产品都进行了严格的资质审核，拥有原厂标签和相关票据以供查验。
A : 我们提供线下付款服务，方便公司的采购与财务对接，具体操作流程可在线咨询客服。
A : 下单前请仔细核对产品型号信息，如因自身原因造成的误订错订，唯样将不接受退换货要求。如果产品出现数量不对、型号不符、产品质量问题时，请务必保留原包装和标签，并在两周内联系我们申请退货。
102990843
严选库存：0
| 价格梯度 | 单价(含税) |
|---|---|
|
暂无价格 |
|
|
最小包：1
制造商那里获得的最小包装数。由于唯样提供增值服务，因此最低起购数量可能会比制造商的最小包装数量少，如果要购买整盘，建议购买这个数量的整数倍
|
交期： 请咨询客服 |
闽公网安备 35021102001214号 闽ICP备17005748号-1 增值电信业务经营许可证：闽B2-20200838
